Rigby Fire Extinguisher Training

Most fires start small. Your staff are usually the first people to see one. If you provide portable extinguishers and expect employees to use them, OSHA rule 29 CFR 1910.157(g) says each of those employees must be trained when hired and again at least once a year after that. 1 Pro Fire teaches that class for Rigby employers. Rigby is one of our listed Idaho service areas, and we schedule the session around your shifts at your location.

Who to check with locally, and who enforces the code

Rigby gets its fire and emergency response from Central Fire District, headquartered at 697 Annis Hwy in Rigby. The code side is statewide. Idaho Code 41-253 makes the International Fire Code the minimum standard everywhere in Idaho, and the Idaho State Fire Marshal and the marshal's assistants are the ones who enforce it (Section 906 of that code is the part on portable extinguishers). Which edition applies today? Ask Central Fire District. While you have them, ask which office handles business inspections in Rigby.

What a session covers

Start with the label. Every extinguisher is rated for certain classes of fire, and the wrong unit can spread a fire instead of putting it out (water on burning grease is the classic case).

  • Class A: wood, paper, cloth and other ordinary combustibles.
  • Class B: flammable liquids.
  • Class C: energized electrical equipment.
  • Class D: combustible metals.
  • Class K: cooking oils and fats.

Fuel, equipment and Class B fires

Jefferson County is farm country. Hay, grain and potatoes lead the county's crops. If your crew fuels trucks, services tractors or handles diesel and oil in a farm shop or equipment yard, the class spends extra time on Class B fires and on why a water unit is the wrong pick for them.

Kitchens

A kitchen with a hood suppression system also needs a Class K portable unit for cooking oil and fat fires. Cooks learn when to reach for it.

Using the unit, and when to leave

Then come the basics: pull, aim, squeeze, sweep. Staff also learn the monthly visual check owners are expected to do, which means looking at the gauge, confirming the pin and seal are in place, and making sure the tag is there and current. Last comes the hardest lesson. Know when to walk away. A fire that is spreading or filling the room with smoke is a fire for the district, so get out and call 911.

Planning the class around your crew

New hires come first. Not sure whether your staff count under the OSHA rule? Ask one question: would a manager tell a worker to grab the unit by the door during a small fire? If yes, train them.

Training covers people, and the units need their own care. See annual extinguisher certification in Rigby, Rigby fire extinguisher service and extinguisher refills after a discharge, or start at the Rigby fire protection hub. Nearby, we also teach extinguisher training in Menan, extinguisher training in Ririe and extinguisher training across Jefferson County.

Questions about extinguisher training in Rigby

Does training replace the annual extinguisher tag?

No. Training is for your people. The yearly tag comes from a certified technician who services each unit.

Who responds if a fire gets past the extinguisher?

Central Fire District. Station 1 is in Rigby, and the district also has stations in Ririe, Lewisville and Menan.

Can you train crews outside Rigby too?

Yes. If you run sites in more than one town, we also teach this class in Roberts, Menan, Ririe and the rest of Jefferson County, plus Bonneville and Madison counties.

For fire extinguisher training in Rigby call (208) 886-5401 or email idaho@1profire.com.