Rigby Fire Extinguisher Annual Certification

Is your extinguisher tag coming due? Under NFPA 10, a certified technician does hands-on maintenance on each unit every 12 months, and the tag on the cylinder records the date and who did the work. 1 Pro Fire lists Rigby among its Idaho service areas. We can service extinguishers in shops, offices, stores and restaurant kitchens on Main Street, State Street or anywhere else in town.

What we do at each extinguisher

The annual visit is hands-on. At every unit, the technician will:

  • Read the gauge and check pressure.
  • Check the pin, tamper seal, hose and nozzle, and replace worn parts.
  • Inspect the cylinder for dents and corrosion.
  • Confirm mounting, visibility and a clear path.
  • Match the unit's rating to the hazard beside it.
  • Fill in the tag.

Shops that store fuel or run welders and battery chargers usually need units rated for Class B flammable liquids and Class C energized electrical hazards, plus Class A for ordinary combustibles. A unit that is low or discharged needs a recharge before it can be tagged; our Rigby fire extinguisher refill service covers that, and repairs or replacement units are on the Rigby fire extinguisher service page.

Longer intervals by extinguisher type

The annual visit is the baseline. Some units carry longer-cycle work on top of it, and the schedule depends on the agent inside the cylinder.

  • Stored-pressure dry chemical: a 6-year internal maintenance (teardown) and a hydrostatic test every 12 years.
  • CO2, water and wet chemical (Class K): a hydrostatic test every 5 years, with no 6-year teardown.

Kitchens with a hood suppression system also need a Class K extinguisher. That hood system has its own inspection every 6 months under NFPA 96 and NFPA 17A.

The monthly check is yours

NFPA 10 gives the owner a monthly visual inspection. Once a month, walk the building and look at each unit: the gauge should read in the green, the pin and seal should be in place, the body should be free of dents, and nothing should block the path to it. Write down the date.

Training is a separate duty. Under OSHA 29 CFR 1910.157(g), when an employer provides extinguishers for employee use, employees must be trained at hire and at least once a year (see fire extinguisher training in Rigby).

The code behind the tag in Rigby

Fire code here is state law. Idaho Code 41-253 makes the International Fire Code the statewide minimum and puts enforcement with the Idaho State Fire Marshal and the marshal's assistants; IFC Section 906 is the extinguisher section. The 2018 IFC took effect in Idaho on January 1, 2021.

Central Fire District provides Rigby's fire response. Its headquarters is at 697 Annis Hwy. Before your next inspection, call the district and ask which office inspects businesses at your address and whether a newer IFC edition has been adopted.

Booking your annual visit

Call (208) 886-5401 or email idaho@1profire.com to get on the schedule. Tell us how many extinguishers you have and what types they are (dry chemical, CO2, Class K). A rough count is fine. We'll use that count to price the visit, then set a date for a technician to come out and work through every unit on your property.

Outside town, we also handle extinguisher certification in Menan, annual extinguisher tags in Ririe and extinguisher certification across Jefferson County. The Rigby fire protection hub lists every service we offer in town.

Rigby extinguisher certification FAQ

What if my tag is out of date?

Call to schedule the annual service. The technician does the full maintenance and tags each unit that passes.

Can I do the annual inspection myself?

No. NFPA 10 assigns the annual maintenance to a certified technician; your part is the monthly visual check.

Who enforces the fire code in Rigby?

Idaho Code 41-253 gives enforcement to the Idaho State Fire Marshal and the marshal's assistants, and Central Fire District can tell you which office inspects businesses at your address.