A fire engine crew may be the one reading your tag
Beverly Hills runs its own fire department. It does about 2,500 business fire inspections a year, and for multi-family, office and retail properties those inspections are usually done by the engine companies. Larger or higher-hazard sites (schools, theaters, high-rises) go to the department's Fire Prevention Division instead.
Either way, your extinguishers get looked at. A missing tag stands out. So does a punch from more than a year ago.
Most of the calls we get from Beverly Hills are about extinguishers. Many start the same way: an inspector has already visited, found a unit untagged or out of date, and set a date to come back and check again. If that's your situation, give us the follow-up date when you call. We can schedule around it.
What a yearly service visit covers
Extinguisher care in California follows NFPA 10 and Title 19. It has two layers.
- Monthly, by you: a quick look. Is the unit in its spot, with the pin and seal in place and the gauge in the green?
- Yearly, by a licensed technician: a hands-on check of the shell, hose, nozzle, pressure, weight and mounting. The result goes on a new tag.
- Every 6 years: stored-pressure dry chemical units get an internal teardown.
- Hydrostatic testing: every 12 years for dry chemical units, and every 5 years for CO2, water and wet chemical (Class K) units. See our hydrostatic testing in Beverly Hills page.
Can't find the manufacture date? That's common. The technician reads it on site, checks when the next test is due, and tells you whether the unit can be serviced or recharged or should be replaced. You don't need to buy a new extinguisher before the visit. Units that have been discharged can usually be refilled; details are on our fire extinguisher refill page, and the yearly tag is covered under annual certification.
Fire extinguisher installation in Beverly Hills
Need new units, or more of them? We supply and mount them. A recent Beverly Hills quote ran $75 each to supply and install a 5 lb ABC dry chemical extinguisher, mounted on the wall with no cabinet.
How many you need, what type and where they go depends on the building. California Fire Code Section 906 and NFPA 10 base it on the hazard, travel distance and the layout of each floor. That's why a two-story shop with one unit downstairs may need a second one upstairs. Kitchens with a hood suppression system also need a Class K unit (see kitchen fire protection in Beverly Hills).
Cabinet or exposed? It depends. Many standard units hang exposed on a bracket. The technician confirms what fits your space. If you're buying in quantity, ask for per-unit pricing on the full count when you request the quote.
If your staff are expected to use the extinguishers, OSHA requires training when they're hired and at least once a year after that. We cover this on our fire extinguisher training page.
Who may service extinguishers in California
Only a firm and technician licensed by the State Fire Marshal. Our California work is done by Hedrick Fire Protection, which holds C-16 (fire protection) and C-10 (electrical) contractor licenses and is licensed by the California State Fire Marshal under Title 19 for portable extinguisher service.
For permits, inspections or code questions specific to your building, contact the Beverly Hills Fire Department. For other services in the city, start at our Beverly Hills fire protection page. Outside the city, see fire extinguisher service in Los Angeles County or Orange County.
Beverly Hills extinguisher questions
Does my extinguisher need replacing, or just an inspection?
Usually just service. The technician checks the age, condition and test dates on site, and if a dry chemical unit is due for its 12-year hydrostatic test or is visibly damaged, replacing it may cost less than testing it.
My extinguisher has no tag and the fire marshal is coming back. What now?
Call us with the date of the return visit. A licensed technician services the unit and tags it. Untagged units are what inspectors flag.
Do extinguishers have to be in a cabinet?
Not always. Many standard units mount exposed on a wall bracket, and the technician confirms what your space calls for.
Do I need a second extinguisher upstairs?
Often, yes. Placement is based on travel distance and is set for each floor, so a second story usually gets its own unit.
Which ZIP codes do you cover?
90210, 90211 and 90212. Those are the city's street-address ZIPs.
For fire extinguisher service in Beverly Hills, call us at (213) 568-0188 or email us at socal@1profire.com
Get a quote for Beverly Hills extinguisher work
- Annual service and tagging
- New extinguishers supplied and mounted
- Hydrostatic testing and recharge