Skip to main content

Find the fault, fix it, prove it works

A trouble light means something failed. It might be a dead backup battery, a ground fault on a circuit, a smoke detector that has drifted out of range or a pull station that no longer reports, and the panel usually can't tell you which one. Our technician can.

We trace the fault to its source, repair or replace the part, and then test the device with the panel so you know the signal actually gets through. Then the trouble clears.

Some repairs start from a list. If your annual inspection left deficiencies, send us the report. We'll work through each item and retest it. (NFPA 72 calls for fire alarm systems to be inspected and tested at least once a year, and some devices more often, so a deficiency list is a common starting point.)

When a repair turns into a project

Swapping a failed detector is a repair. Replacing the control panel, adding devices or moving horns and strobes after a remodel can change the approved system, and that kind of work may need a permit. In Corona, the Fire Department's Fire Prevention Division handles fire code permits, plan checks and new construction inspections. Fire-related plans are submitted through the Building Department at Corona City Hall.

Ask early. We'll tell you whether your job looks like a like-for-like fix or a change that should probably go through plan review before work starts. Confirm the current code edition with Fire Prevention before plans are drawn.

Inside city limits or in Temescal Valley

Most Corona addresses fall under the Corona Fire Department, a city department with seven fire stations. Temescal Valley is different. That unincorporated area in ZIP 92883 is served by Riverside County Fire Department Station 64 on Campbell Ranch Road, so take permit and inspection questions for a building there to Riverside County Fire.

Corona is one of our listed service areas, from Lincoln Business Center and Birtcher Business Center to Dos Lagos, Eagle Glen and Downtown.

Who works on your alarm

Alarm repair is electrical work. California jobs for 1 Pro Fire are done by Hedrick Fire Protection, which holds C-10 (electrical) and C-16 (fire protection) contractor licenses and is licensed by the California State Fire Marshal under Title 19 for extinguisher service and for testing water-based fire protection systems.

Get your alarm fixed

Call (951) 384-0323 or email socal@1profire.com. Tell us your address and what the panel display says. Attach the inspection report if you have one.

Our services include

Corona fire alarm repair questions

Do I pay on site, or will I be invoiced?

The technician can take payment on site. Card payments carry a 3% surcharge.

Does my repair need a permit?

It depends on scope. Changes such as a new panel or added devices may need one, and Corona's Fire Prevention Division handles fire code permits, so confirm with them.

My building is in Temescal Valley. Who covers it?

Riverside County Fire Department, from Station 64. Corona Fire covers the incorporated city.

Will you retest after the repair?

Yes. Each repaired device is tested with the panel before we call the job done.

(951) 384-0323 or socal@1profire.com
Corona Links