The alarm went off overnight, and there was no fire
We've had that exact call from Burbank. The alarm sounded in the night and the fire department came out. Crews found no fire and no visible damage, yet something in the system had shorted or failed, and the caller wanted a technician to come look at it.
Something set it off. It can happen again.
Unwanted alarms usually trace back to a few places: a smoke detector that is dirty or worn out, a wiring circuit that is damaged or wet, a weak panel battery, or a sprinkler water-flow switch that trips on a pressure surge. A trouble light is a different problem. It means part of the system can't report a fire right now. Any trouble light is worth a call.
What we check on a repair visit
- The panel's event history and any trouble or supervisory codes.
- The device that started the alarm, plus the others on its circuit.
- Wiring for shorts, open circuits and ground faults.
- Standby batteries and the panel power supply.
We replace what failed. Then we test it. If the fault sits in a sprinkler flow or tamper switch, our fire sprinkler service in Burbank covers the water side of the system.
Burbank's own fire department inspects alarm systems
Burbank handles fire protection as a city: the Burbank Fire Department responds from six stations, and its Fire Prevention Bureau inspects fire alarm systems on new construction and tenant improvements, along with routine fire and life safety inspections of commercial and multi-family buildings. Fix faults before that visit.
NFPA 72 calls for fire alarm systems to be inspected and tested at least once a year, with some devices checked more often. For scheduled testing, see our fire alarm testing and service in Burbank. The Fire Prevention Bureau can tell you which requirements apply to your building, and the City of Burbank website lists its contacts.
Who does the work
Our California work is performed by Hedrick Fire Protection, which holds C-10 (electrical) and C-16 (fire protection) contractor licenses. Burbank is one of our listed service areas. Most of the calls we get from Burbank are about extinguishers, so if your tags are due as well, our fire extinguisher service in Burbank page explains the annual visit. Other services are on the Burbank fire protection hub, and nearby we handle fire alarm repair in Los Angeles County and fire alarm repair in Orange County.
Tell us what the panel is doing. Call us at (213) 568-0188 or email us at socal@1profire.com and we'll give you the earliest time a technician can be there.
Our services include
What to have ready when you call
- What the panel display says, word for word.
- When the alarm or trouble signal started.
- Whether the fire department responded.
- The panel brand, if a label shows it.
A photo of the panel screen helps.
Related Links
Burbank fire alarm repair questions
The fire department found no fire. Do I still need a repair?
Yes. If the alarm sounded with no fire, a device, wire or panel part caused it, and that part is still in the system until someone finds and replaces it.
Can a technician come out same day?
Call and ask. We'll give you the earliest open time when you reach us.
How often does a fire alarm need testing?
At least once a year under NFPA 72. Some devices need checks more often.
Do you service Burbank?
Yes. Burbank is on our service area list, including ZIP codes 91501 through 91508.
(213) 568-0188