Fire alarm testing and repair · C-10 electrical and C-16 fire protection licensed · Cities and unincorporated county
What a yearly alarm test covers
NFPA 72 says a fire alarm system must be inspected and tested at least once a year. Some devices need it more often.
On a normal visit the technician walks the whole building and checks each part of the system: smoke and heat detectors, manual pull stations, any sprinkler flow and tamper switches wired to the panel, horns and strobes, the control panel, and the standby batteries that run the system during a power outage. If your panel reports to a monitoring company, that signal gets tested as well. Anything that fails is written down so it can be fixed. Then you decide on repairs.
Which fire office reviews your alarm
It depends on where the building sits. A city address and an unincorporated address in this county answer to different offices.
- City of San Diego: The Fire Prevention Bureau at San Diego Fire-Rescue does fire inspections inside city limits. Its complaint inspections cover only the city and the Port of San Diego.
- Unincorporated areas: Inside the San Diego County Fire Protection District, the County Fire Marshal inspects businesses for compliance with the Consolidated Fire Code, and that includes commercial fire protection systems. The same program also does plan review and inspections for the Deer Springs Fire Protection District.
- Other cities: Many have their own fire prevention bureau. Vista is one. Start with that office.
Adding devices or replacing a panel
New alarm work needs plans. In the county fire district, fire alarm drawings are a deferred submittal: the building plans are approved first, and then the alarm plans go straight to the San Diego County Fire Protection District. Is your project outside the district? Then the plans go to the fire authority for your own city or district.
The code edition matters too. The 2026 San Diego County Consolidated Fire Code holds the County's amendments to the 2025 California Fire Code, along with the ordinances of the unincorporated fire districts. Ask the district which effective date it uses before anyone draws plans. The City of San Diego adopted the 2025 California Fire Code with its own amendments, effective January 1, 2026.
Bringing a dark alarm back online
Some alarms have been off for months. Others show a trouble light that nobody has cleared. Getting either one working again usually takes more than pressing reset, because devices, wiring and the panel all have to be tested before the system can be counted on again. Read how we handled a fire alarm that sat dormant for two years in Rancho Santa Margarita.
Who does the work
In California, 1 Pro Fire's work is done by Hedrick Fire Protection. Hedrick holds C-10 (electrical) and C-16 (fire protection) contractor licenses and is licensed by the State Fire Marshal under Title 19 for extinguisher and water-based system service. To get started, call (619) 568-5440 or email socal@1profire.com with the address. Include the panel brand if you know it.
Does the same building have other systems? See fire sprinkler service in San Diego County, kitchen hood suppression service and fire extinguisher service. For a specific city, see fire alarm service in the City of San Diego, Escondido or Chula Vista, or go back to the San Diego County service hub.
Our services include
Get a fire alarm quote in San Diego County
Tell us the address and what the panel is showing.
(619) 568-5440 or socal@1profire.comRelated Links
Fire alarm questions
How often does a fire alarm need testing?
At least once a year under NFPA 72. Some devices are on a shorter cycle.
Who inspects alarms in unincorporated San Diego County?
Inside the San Diego County Fire Protection District, the County Fire Marshal inspects commercial fire protection systems. In the City of San Diego, inspections come from the San Diego Fire-Rescue Fire Prevention Bureau.
Do I need plans to add detectors or a new panel?
Usually, yes. In the county fire district, alarm plans are a deferred submittal sent in after the building plans are approved, and outside the district they go to your local fire authority.
Which fire code applies to my building?
The 2025 California Fire Code plus local amendments. Ask your fire authority which edition and effective date apply.
(619) 568-5440