Used it once? It needs a refill
A used extinguisher isn't ready. Even a short burst counts. Once someone pulls the pin and squeezes the handle, the cylinder loses pressure and some of its agent, and it may not discharge properly the next time anyone needs it. Standard practice under NFPA 10 is to recharge any extinguisher after any use, then tag it.
Some of the extinguisher calls we get from Blythe ask a related question. Will some of these need refilling? Often, yes. A gauge needle out of the green, a missing pull pin or a broken tamper seal usually means a unit has been used or has lost pressure.
Desert heat and the gauge
Blythe averages about 179 days a year at 90°F or hotter. Pressure in a stored-pressure cylinder climbs as it heats and falls as it cools, so a gauge on a unit mounted outside or riding in a truck can read differently at noon than at dawn. Read it the same way each month. If the needle sits outside the green, have it checked.
Fire extinguisher recharge: what the technician does
Refill and recharge are the same job. A recharge puts the right agent back in the cylinder and brings it up to its rated pressure. A typical visit goes like this:
- Check the hydrostatic test date and the 6-year maintenance date first.
- Empty any leftover agent and inspect the valve, stem, O-ring, hose and cylinder.
- Refill with the agent the unit is rated for: Class A, B, C, D or K.
- Pressurize, leak-check, and fit a new pin and tamper seal.
- Record the work on the service tag.
Dates decide what happens next. Dry chemical cylinders need a hydrostatic test every 12 years, while CO2, water and wet chemical (Class K) units need one every 5 years, and a cylinder past its date gets tested before refill or comes out of service. Stored-pressure dry chemical units also get an internal teardown every 6 years. Disposable units can't be recharged. They get replaced. Our hydrostatic testing page for Blythe explains the cylinder test.
Who may refill extinguishers, and who checks in Blythe
California limits extinguisher service to firms and technicians licensed by the State Fire Marshal under Title 19. Our California work is done by Hedrick Fire Protection, which holds C-16 and C-10 contractor licenses and is State Fire Marshal licensed under Title 19 for portable extinguisher service.
In the city, fire marshal duties sit in the Building Department. The Chief Building Inspector/Fire Marshal can be reached at (760) 922-6161 ext. 1225. Blythe's fire code lives in Municipal Code Chapter 15.20, so ask that office which edition applies to your building and what they expect to see on your extinguishers at inspection. Fire response comes from the city's Volunteer Fire Department (On Call) at 201 N. Commercial. State rules are on the California State Fire Marshal site.
Before you call
Count your units first. Note each one's type and size, the date on its last tag, and the date of any inspection you're working toward, because those details shape how the visit is planned. Then call (951) 384-0323 or email socal@1profire.com
More extinguisher pages
Annual tags have their own page: fire extinguisher annual certification in Blythe.
Related Links
Common questions about extinguisher refills
Will some of my extinguishers need refilling?
Any unit that's been discharged needs it. So does one with a gauge out of the green or a missing pin or seal. The technician checks each unit on site and tells you which ones need a recharge, which need a hydrostatic test, and which should be replaced before anything gets a new tag.
Can extinguishers that expired years ago be ready for an inspection?
Often, yes. Units that far past their tag may also be due for a 6-year teardown or a hydrostatic test, and some may cost less to replace than to recharge, so call as soon as you know the inspection date.
Do new extinguishers without a service tag need an inspection before an occupancy permit inspection?
Ask the city's Chief Building Inspector/Fire Marshal what they expect to see. If they want a current tag on new units before the occupancy inspection, we can inspect them and tag them as part of the same visit.
Do you service Blythe?
Yes. Blythe, including ZIP codes 92225 and 92226, is one of our listed service areas.
Is a refill the same as a recharge?
Yes. Both mean refilling the agent and repressurizing the cylinder, then tagging it.
(951) 384-0323