Taking over a building with no alarm records
Six of our Barstow calls since 2015 have been about fire alarms. One stands out. A new general manager needed an NFPA 72 report for the business license, and the previous management had taken the records with them, so nobody could say when the system was last tested or by whom.
That's fixable. A full inspection and test now gives you a current baseline, whatever the last owner did or didn't keep. Start there.
Fire alarm testing in Barstow: the yearly NFPA 72 visit
NFPA 72 sets the minimum. Every fire alarm system is inspected and tested at least once a year, and some devices get checked more often than that, depending on the device type. On a typical annual visit, a technician works through:
- The control panel, its trouble and supervisory signals, and the backup batteries
- Initiating devices: smoke detectors, heat detectors and pull stations
- Notification appliances: horns, strobes and speakers
- The signal to your monitoring company, if the system is monitored
Anything that fails gets written up. Results go into the inspection report.
If the building also has sprinklers, ask about testing both together, since the water flow and valve tamper switches on a sprinkler system usually report to the alarm panel and have to be tripped during the alarm test anyway. One Barstow caller asked for exactly that: a single ballpark for a combined sprinkler and alarm inspection. The sprinkler side is covered on our Barstow fire sprinkler service page.
Cut wires, trouble lights and old detectors
Problems don't wait for the test date. Another call came after a worker cut a fire alarm wire and the system lost power. That's a repair call. Until the circuit is fixed, part of the building may have no detection, and the panel will keep showing trouble. Details are on our fire alarm repair page for Barstow.
Smoke detector replacement comes up too. One owner asked about replacing eight to ten at once. On a fire alarm system, each new detector has to be compatible with the panel, and once it's mounted it gets tested so you know it actually reports an alarm.
Barstow's fire district, and who does the work
The Barstow Fire Protection District provides fire and emergency response in the city. It's a subsidiary district of the City of Barstow. On the district's fire code page, the fire marshal duties sit with the city's building official (760-255-5169). Ask that office which edition of the California Fire Code applies to your building, and what it wants to see after your alarm test.
Our California work is done by Hedrick Fire Protection. Hedrick holds C-16 (fire protection) and C-10 (electrical) contractor licenses, and is licensed by the State Fire Marshal under Title 19 for extinguisher service and water-based system testing.
Barstow fire alarm questions
Do you do fire alarm testing in Barstow?
Yes. Barstow is in our service area. Have the address and a rough device count ready when you call.
The old management took the records. What now?
Book a full inspection and test. It documents where the system stands today, so the missing history matters less.
How much does it cost to replace 8 to 10 smoke detectors?
It depends. Price turns on the detector type, whether the detectors are tied to an alarm panel or stand alone, and how many need replacing, so we quote it once we know the panel make and the count.
A wire was cut and the panel lost power. Is that an emergency?
Treat it like one. Call us as soon as the panel shows trouble.
Call (909) 219-9411 or email socal@1profire.com to schedule fire alarm testing or repair in Barstow.
Our services include
Before you call
- Roughly how many detectors, pull stations and horns the building has
- The panel make, if you can see it
- Your last inspection report, if you have one
- Any deadline from the fire marshal or your insurer
Related Links
Other fire protection in Barstow
See all Barstow fire protection services, fire extinguisher service in Barstow, or fire alarm service across San Bernardino County.
(909) 219-9411