Skip to main content

Start with the date on the cylinder

Every extinguisher has a test history. Find the label or stamp on the cylinder. It shows the last hydrostatic test, and the type of extinguisher decides how long that test is good for: dry chemical units go 12 years between tests, while CO2, water and wet chemical (Class K) units come due every 5 years.

Most of the calls we get from Banning are about fire extinguishers. Of all the service dates on an extinguisher, the hydro test comes around least often. That makes it the easiest one to miss.

How often each type is tested

  • Dry chemical (stored pressure): hydrostatic test every 12 years, plus a 6-year internal maintenance (a full teardown) between tests.
  • CO2: every 5 years.
  • Water: every 5 years.
  • Wet chemical (Class K): every 5 years.

The hydro test doesn't replace anything else. The owner still does a monthly visual check, and a certified technician still does annual maintenance and records it on the tag. You can read more about that yearly visit on our Banning annual extinguisher certification page.

Restaurants, watch the Class K date. Any kitchen with a hood suppression system also needs a Class K portable, and that cylinder is on the shorter 5-year cycle. The hood system itself is serviced separately (see kitchen fire suppression service in Banning).

What happens during the test

The idea is simple. A cylinder holds pressure for years. The test checks that it still can.

  1. The technician discharges the extinguisher and removes the valve.
  2. The cylinder is checked inside and out for corrosion, dents and thread damage.
  3. It's filled with water and brought up to the test pressure for that cylinder.
  4. If the cylinder leaks, bulges or stays distorted, it fails and is taken out of service.
  5. If it passes, it's dried, recharged and labeled with the new test date.

A failed cylinder can't be repaired. It's replaced. Recharging is part of every test. If an extinguisher only needs refilling after use, see extinguisher refills in Banning.

Banning inspects every business, every year

Banning's Office of the Fire Marshal (99 E. Ramsey Street) works under the Riverside County Fire Department through a contract with the city. Its Annual Inspection Program visits every existing business in Banning every year under California Fire Code Section 103.3. Visits come from Fire Prevention inspectors or engine company crews in Riverside County Fire uniforms.

Most violations must be corrected within 10 to 15 days. That isn't much time. If you know a cylinder is close to its test date, have it tested before the inspector comes, so you're not racing a correction deadline.

Who may test extinguishers in California

California law (Title 19) says extinguisher service must be done by a firm and a technician licensed by the State Fire Marshal. Our California work is done by Hedrick Fire Protection, which holds C-16 and C-10 contractor licenses and is licensed by the State Fire Marshal for portable extinguisher service and for inspection, testing and maintenance of water-based fire protection systems.

To schedule hydrostatic testing in Banning, call (951) 384-0323 or email socal@1profire.com

Other Banning extinguisher services: fire extinguisher service and fire extinguisher training for staff. To see every service we offer in the city, go to the Banning fire protection page. Outside Banning, we also do hydrostatic testing across Riverside County and in San Bernardino County.

Questions from Banning callers

Do you service the Banning area?

Yes. Banning (ZIP 92220) is in our service area. The phone number and email on this page reach us for work there.

Can someone come out today?

Call and we'll check that day's schedule. Have your extinguisher count ready.

Do your technicians work weekends?

No. They're off Saturday and Sunday, so book a weekday visit.

Is the hydro test the same as the annual inspection?

No. The annual maintenance is a yearly check recorded on a tag. The hydrostatic test pressure-tests the cylinder itself on a 5- or 12-year cycle, depending on the extinguisher type.

Get a hydrostatic testing quote

When you call, have each extinguisher's type and the test date on its cylinder ready. Then we can tell which ones are due.

(951) 384-0323 or socal@1profire.com

Not sure which cylinders are due?

Check the labels. Then get in touch.

(951) 384-0323