Training and inspection in one visit
Most of the calls we get from Victorville are about fire extinguishers. Some callers want staff training added to the annual service so the whole job fits in one morning.
You can book both together. One plan callers ask for: training early in the morning, before the afternoon heat, with the technician working through the inspection over the hours after. Have this ready when you call:
- How many extinguishers you have, and roughly where they hang
- How many people will attend, and whether they work different shifts
- The start time you want
- Any special units on site, such as Class K cylinders in a kitchen
What staff practice
Sessions start with the decision that matters most: fight a small fire, or get out and call 911.
- The PASS method: pull the pin, aim at the base of the fire, squeeze the handle, sweep side to side.
- Reading the label. Class A is ordinary combustibles, B is flammable liquids, C is energized electrical, D is combustible metals and K is cooking oils and fats.
- The monthly check owners are expected to do: gauge in the green, pin and seal in place, a current tag, and nothing stacked in front of the unit.
Hands-on practice or a walk-through? Tell us. Session length depends on headcount and format, so we scope it with you at booking.
For your OSHA file, keep a sign-in sheet with each person's name and the training date. File it with your safety records.
Wind changes how a cylinder works
High winds are common in Victorville all year, and spring is usually the worst. Dry chemical powder blown back at the operator does nothing to the fire. Anyone who might use an extinguisher outdoors, in a parking lot, a yard or a loading area, should practice approaching from upwind so the discharge carries toward the flames. Stand upwind. Keep an exit behind you.
Who requires training, and who inspects
OSHA 29 CFR 1910.157(g) applies when an employer provides portable extinguishers for employees to use: each worker must be trained at hire and at least once a year after that.
Locally, the City of Victorville Fire Department inspects every business in the city each year, and a Fire Inspector contacts you at business license renewal. The department also carries out the inspections the State Fire Marshal mandates for schools, health care facilities and family day care homes. Not sure what the inspector will look for? Ask the department before the visit.
California work is done by Hedrick Fire Protection. Hedrick holds C-16 (fire protection) and C-10 (electrical) contractor licenses and is licensed by the State Fire Marshal under Title 19 for portable fire extinguisher service.
Cost and booking
Training is quoted per site. For the inspection side of a combined visit, recent Victorville quotes have run $35 per extinguisher for annual certification, with a lower rate past five units. A unit that fails may need a recharge or replacement, which costs more.
Need the cylinders handled too? See annual extinguisher certification in Victorville, extinguisher refills and hydrostatic testing for older units. All our services in the city are on the Victorville fire protection page. Training outside the city: San Bernardino County, Riverside County and Los Angeles County.
To book training, call (909) 219-9411 or email socal@1profire.com.
Questions Victorville callers ask about training
Can training and the inspection happen in one visit?
Yes. Book them together and plan training early, with the inspection after. Have your extinguisher count, the number of people attending and your preferred start time ready when you call.
How often do employees need extinguisher training?
If you provide portable extinguishers for employees to use, OSHA requires that they be trained when first hired and at least once a year after that. New hires between sessions still need it.
Will the $35 inspection get the certificate?
It covers an existing unit that passes the annual check, and that unit gets a new service tag. A unit that fails needs a recharge or replacement. Those cost more.
Are there extra costs if my extinguisher is old?
Sometimes. Stored-pressure dry chemical units need an internal teardown at 6 years and a hydrostatic test at 12 years, and both cost more than the annual inspection.
Related Links
Ready to train your staff?
Fire extinguisher training and service for Victorville businesses.
(909) 219-9411