Skip to main content

Who owns the hydrant decides who tests it

If a private fire service main on your property feeds the hydrant, the hydrant is yours to keep working. NFPA 25 sets the schedule. Each private hydrant gets a flow test and an inspection once a year, and NFPA 24 covers the private main and fittings that feed it.

Not sure where your piping starts? The City of Norco runs its own water utility through the Public Works Water Utility Division, so questions about the city's side of the connection go there. We handle the private side.

What happens at the hydrant

A technician comes to your property. The visit usually goes in this order:

  1. Check that the hydrant is visible, reachable and has its caps and outlet threads in place.
  2. Open the hydrant fully and flush it.
  3. Run the flow test using the NFPA 291 method and record pressure and flow readings.
  4. Close it slowly and check for leaks at the caps and base.
  5. Note any leaks, stiff operating nuts or damage for repair.

NFPA 291 also sets the color code for hydrant bonnets by flow class, so a test result can tell you whether the bonnet color still matches what the hydrant delivers. Markings matter here too. Norco's fire code (§15.09.230) requires hydrant locations to be marked following Riverside County Fire Department guidelines.

Norco's fire marshal and who may do the work

Norco has no city fire department. The City Council voted in 2011 to dissolve it, and CAL FIRE/Riverside County Fire Department now provides fire and emergency response under contract.

Inspections are a separate office. The Riverside County Fire Department's Office of the County Fire Marshal handles plan review and fire and life-safety inspections for contract cities, Norco included. Its Norco Eastvale Fire Marshal's Office is at 3902 Hillside Avenue (951-737-8097). Norco's fire code adopts the 2025 California Fire Code with local amendments; ask that office which requirements apply to your site.

Who does our work? Hedrick Fire Protection performs our California jobs and holds C-16 (fire protection) and C-10 (electrical) contractor licenses, plus State Fire Marshal licensing under Title 19 for inspection, testing and maintenance of water-based fire protection systems.

How the quote is set

Price depends on your site. We look at how many hydrants you have, how easy they are to reach, and whether the test turns up repairs such as a missing cap or a valve that won't open. Repairs add cost. Tell us the hydrant count when you call.

For annual fire hydrant testing in Norco, call us at (951) 384-0323 or email us at socal@1profire.com

Need more than the test? See fire hydrant repair in Norco, ongoing hydrant maintenance, fire sprinkler service and our Norco fire protection hub. Outside Norco, we also test hydrants in Riverside County, San Bernardino County and Orange County.

Hydrant testing questions from Norco

Can you run a hydrant flow test for an ADU permit?

Yes. We run hydrant flow tests. Before we schedule, ask the fire marshal's office what flow figure your permit needs, since that target comes from the fire authority and not from us.

The fire department flagged missing caps on our hydrant. What now?

That's a repair item. Call us with the notice in hand and we'll quote the replacement caps.

Do I bring anything in, or do you come to Norco?

We come to you. Hydrants are tested where they stand, so the work happens on your property.

Get a Free Fire Protection Quote in Norco

(951) 384-0323 or socal@1profire.com

Book your yearly hydrant test

Private hydrant flow tests and inspections anywhere in Norco.

(951) 384-0323