Skip to main content

Check the date on the cylinder

Every extinguisher cylinder has a test date. Find it. (It's usually stamped on the cylinder or printed on a label from the last hydrostatic test.) Hydrostatic testing fills the empty shell with water and pressurizes it well above its normal working pressure, so a technician can see whether the metal still holds or has been weakened by age, dents or corrosion.

The interval depends on what's inside:

  • Dry chemical: every 12 years.
  • CO2: every 5 years.
  • Water: every 5 years.
  • Wet chemical (Class K): every 5 years.

These intervals come from NFPA 10, and California applies them through Title 19. Stored-pressure dry chemical units also need a 6-year internal teardown. That's a separate job. Your annual tag doesn't cover either one.

What happens to your extinguisher

The technician empties the unit, removes the valve and looks inside the shell for rust, pitting or damage before anything goes under pressure. Then comes the test. The cylinder is filled with water, pressurized and watched for leaks, bulging or permanent expansion. After that it's dried, recharged and labeled with the new test date.

Some cylinders fail. A failed shell is taken out of service for good and has to be replaced, since it can't safely be refilled and hung back on the wall.

Fire inspections here go through OCFA

Capistrano Beach isn't its own city. It has been a neighborhood of Dana Point since the city incorporated on January 1, 1989, so a business at a 92624 address follows Dana Point's rules. The Orange County Fire Authority enforces fire and life safety codes for the city. Its Community Risk Reduction Department carries out safety inspections of existing businesses, schools and apartment buildings in member cities, Dana Point among them.

An expired test date is easy to spot. Whether you run a surfboard shop or metal fabrication business in Doheny Village or manage a mixed-use building on Doheny Park Road, the fix is the same: get the cylinder tested or replaced. Confirm your building's requirements with OCFA.

Who may test your cylinders

In California, extinguisher service must be done by a firm and technician licensed by the State Fire Marshal. Our California work is performed by Hedrick Fire Protection, which holds C-16 and C-10 contractor licenses and is licensed by the State Fire Marshal under Title 19 for portable extinguisher service.

Related extinguisher work in Capistrano Beach

Hydro testing is one date on a longer calendar.

Outside Capistrano Beach, see hydrostatic testing in Orange County, hydrostatic testing in San Diego County and hydrostatic testing in Los Angeles County.

Hydrostatic testing FAQ

How do I know when my extinguisher is due?

Look for the date of the last test, which is usually stamped on the cylinder or shown on a hydro label from the shop that did the work. Dry chemical units go 12 years between tests. CO2, water and wet chemical units go 5.

Is the annual inspection the same as a hydrostatic test?

No. The annual visit checks and tags the unit, while the hydro test pressurizes the empty shell with water to prove it's sound, and it comes due on a much longer cycle.

What if my cylinder fails?

It comes out of service. A failed cylinder can't be refilled, so it gets replaced.

Who handles fire inspections in Capistrano Beach?

The Orange County Fire Authority does, through its Community Risk Reduction Department. Ask OCFA what applies to your building.

To book hydrostatic testing in Capistrano Beach, call (949) 558-2201 or email socal@1profire.com. Have your cylinder dates ready.

Due for a hydro test?

Send us the dates on your cylinders.

(949) 558-2201 or socal@1profire.com

Questions about a cylinder?

Ask before the date runs out.

(949) 558-2201