Skip to main content

NFPA 72 testing · Repairs · New and modified systems · Hedrick Fire Protection, C-10 & C-16

Planning to add detectors, replace a panel or wire a new building in Riverside County? Start with the paperwork. Where the Riverside County Fire Department covers your area, shop drawings for a new or modified fire alarm system go in through the county's RivCoPlus portal, and its Office of the Fire Marshal has to approve them before installation begins. Our California alarm work is done by Hedrick Fire Protection under its C-10 electrical and C-16 fire protection licenses. Call (213) 568-0188 or email socal@1profire.com.

Adding or changing devices? Drawings go in first

Small changes add up. Extra smoke detectors, a moved strobe, a panel replacement or a tenant buildout that extends the system into new rooms will usually count as a modification, so ask the reviewing office before you decide a job is too small for review. We build the schedule around that approval. Installing first and asking later can mean opening ceilings twice.

Does the same project include a commercial kitchen hood suppression system? County Fire requires that system to be pre-tested before the county's own acceptance test, and our kitchen suppression service in Riverside County covers that side of the job.

What the annual test covers

NFPA 72 calls for fire alarm inspection and testing at least once a year. Some devices need attention more often. On a typical visit, a technician checks the control panel for trouble and supervisory signals, looks at the backup batteries, activates initiating devices (pull stations, smoke and heat detectors, sprinkler flow and valve switches) and confirms the horns and strobes respond. If the panel reports off-site, the signal should reach the monitoring receiver too. Anything that fails gets written down. Then it gets fixed.

In a sprinklered building, the alarm panel watches the sprinkler valves and water flow. That makes it sensible to line up the alarm test with your fire sprinkler inspection. Panel been off for a while? We brought a Rancho Santa Margarita fire alarm back online after two years dark.

Who reviews alarm work at your address

The department that answers a 911 call in Riverside County is not always the office that reviews your alarm drawings, and the split falls into three groups.

Not sure which applies? Send us the address.

Code edition for 2026 projects

Unincorporated Riverside County has worked under Ordinance 787.10, which adopted the 2022 California Fire Code with local amendments based on the county's climate, geology and terrain. An October 28, 2025 submittal to the Board of Supervisors proposed Ordinance 787.11 to adopt the 2025 California Fire Code and the California Wildland-Urban Interface Code, with January 1, 2026 as the intended effective date. Cities adopt their own. Confirm the edition with the reviewing office before design starts.

Nearby cities and related services

Building in a specific city? See fire alarm service in Temecula, Moreno Valley and Palm Desert. For the rest of the building, we also do fire extinguisher service and annual fire hydrant testing, and the Riverside County service hub lists every service.

In Norco, we handled extinguisher certification for a 60-vendor rodeo event in one service day. Other jobs include a San Diego hood system finished inside a fire marshal's 30-day deadline, a Carlsbad hydrant repaired instead of replaced on a $10,000 quote, bilingual extinguisher service for a La Puente restaurant and weatherproof extinguisher tags for a Victorville carnival. Call (213) 568-0188 or email socal@1profire.com.

Riverside County fire alarm FAQ

How often does a fire alarm need testing?

At least once a year under NFPA 72. Some devices need checks more often.

Do I need approval to add smoke detectors?

Usually, yes. In County Fire territory, new or modified alarm systems need shop drawings approved by the Office of the Fire Marshal through RivCoPlus before installation, and in other cities you ask that city's fire marshal.

County Fire responds in Temecula. Does it review my alarm plans?

No. Temecula has its own fire marshal office.

Is the 2025 California Fire Code in effect?

For unincorporated areas, Ordinance 787.11 proposed it with an intended effective date of January 1, 2026. Cities adopt their own codes, so confirm the edition with the office reviewing your project.

Book fire alarm testing or a system change in Riverside County

Tell us your city and what the system needs.

  • Annual NFPA 72 inspection and testing
  • Troubleshooting and repairs on trouble conditions
  • New and modified systems planned around plan review
(213) 568-0188 socal@1profire.com

Work done under Hedrick Fire Protection's C-10 and C-16 licenses.