Skip to main content

Check the date on the cylinder

Start with the cylinder itself. The annual service tag shows the last yearly check, but the hydrostatic test date is stamped into the shell or printed on a test label, and it runs on a much longer clock. Under NFPA 10 and California's Title 19 rules, the interval depends on what's inside:

  • Dry chemical: every 12 years
  • CO2: every 5 years
  • Water: every 5 years
  • Wet chemical (Class K): every 5 years

Dry chemical units also get a 6-year internal maintenance. That means a dry chemical extinguisher is opened up twice in twelve years: once at the 6-year teardown, again at the 12-year hydro test. Then the cycle starts over.

What happens during the test

The technician empties the extinguisher, removes the valve and inspects the inside of the shell. Next the cylinder is filled with water and brought up to its test pressure. Water is used because it barely compresses, so a weak shell that fails under test leaks or splits instead of releasing a burst of stored energy.

Any cylinder that leaks, bulges, distorts or shows corrosion fails and is taken out of service. Passing units get dried and recharged. Then they're tagged and returned.

Who reviews extinguishers at Calabasas businesses

Fire service in Calabasas comes from the Los Angeles County Fire Department under a city contract. Business inspections are handled by the department's Fire Prevention Division through its regional inspection office in Calabasas, at 26600 Agoura Road, Suite 110 (818-880-0341).

The city uses the 2025 California Fire Code, as amended by the county fire code. Extinguishers fall under Section 906. Questions about what an inspector expects go to that office.

Who may test your extinguishers

In California, a firm and technician licensed by the State Fire Marshal must do extinguisher service. Our California work is performed by Hedrick Fire Protection, which holds C-16 and C-10 contractor licenses and is State Fire Marshal licensed under Title 19 for portable extinguisher service and for inspection, testing and maintenance of water-based fire protection systems. Ask any other firm to show theirs.

Other extinguisher work in Calabasas

Hydro testing usually happens alongside other extinguisher work.

Need a hydrant flow test instead? See our Calabasas fire hydrant services.

Hydrostatic testing questions

How much does hydrostatic testing cost?

We quote hydrostatic testing per cylinder, and the price depends on the extinguisher's type and size. For context, a recent Calabasas quote for annual extinguisher certification was $35 per extinguisher, tag included. The hydro test is a separate service.

When would a technician be in the area?

Send your address and unit count, and we'll set a date. Scheduling depends on the job.

Is the yearly tag the same as a hydro test?

No. The annual tag covers yearly maintenance, while the hydrostatic test is a pressure test of the shell on a 5- or 12-year interval set by the extinguisher type.

What if my extinguisher fails the test?

It can't go back in service. Replace it with a unit rated for the same hazard.

Call (213) 568-0188 or email socal@1profire.com with the number of extinguishers, their types and the dates stamped on each cylinder, and we'll quote the job and give you a date.

Get a hydrostatic testing quote

  • Quotes by phone or email
  • Priced per cylinder, by extinguisher type
(213) 568-0188 or socal@1profire.com
Calabasas Links

Due for a hydro test?

Send us your cylinder dates.

(213) 568-0188