Skip to main content

Start with the water at your site

Pipe size depends on water. Las Virgenes Municipal Water District supplies drinking water to Calabasas, along with Agoura Hills, Hidden Hills, Westlake Village and nearby areas, so your connection most likely ties into that system.

Before anyone lays out heads or sizes pipe, the designer needs fire flow test results: how much water the main can deliver at your connection, and at what pressure. Who lines it up? The owner or the system designer does. Plan for it early. One Calabasas caller was told by a water department that it doesn't perform fire flow tests, so ask your designer how the test will be arranged before the design schedule is set.

Plan check and inspection go through LA County Fire

The city runs no fire department of its own. Fire service in Calabasas comes by contract from the Consolidated Fire Protection District of Los Angeles County, which is the Los Angeles County Fire Department.

Its Fire Prevention Division lists Calabasas as both a plan check office and an inspection office. Both share one phone: (818) 880-0341. Business inspections run through the Calabasas regional inspection office at 26600 Agoura Road, Suite 110, Calabasas, CA 91302.

How an installation usually runs

  1. Site walk. We look at the building, how it's used and where the water service comes in.
  2. Flow test. The owner or designer arranges it and hands the results to the design team.
  3. Design. The designer works out head layout, pipe sizes and hydraulic calculations from the flow test numbers.
  4. Plan check. Drawings go to LA County Fire Prevention for review before work starts.
  5. Install. We run pipe, set heads and connect the riser.
  6. Test and inspect. The new piping is pressure tested, and the county inspector checks the finished system before it goes into service.

Who may install it

Our California work is done by Hedrick Fire Protection. Hedrick holds C-16 (fire protection) and C-10 (electrical) contractor licenses and is licensed by the California State Fire Marshal under Title 19 for inspection, testing and maintenance of water-based fire protection systems.

After the system is in service

The NFPA 25 clock starts at once. A new system needs quarterly and annual inspections, plus a 5-year internal pipe assessment with gauge replacement or testing, and California's Title 19 adds a 5-year service and certification by a State Fire Marshal licensed contractor. Our Calabasas fire sprinkler service page covers that ongoing work.

To talk through a Calabasas sprinkler project, call (213) 568-0188 or email socal@1profire.com

Our services include

Have this ready when you call

  • The building address and ZIP code
  • What the building is used for and its rough size
  • Any existing drawings
  • Flow test results, if you already have them
  • Whether plan check has started
(213) 568-0188 or socal@1profire.com

Calabasas sprinkler installation questions

Which fire code applies to a new system in Calabasas?

The city's building codes page lists the 2025 California Fire Code as amended by the Los Angeles County fire code. Confirm the edition in force with the Calabasas Fire Prevention office before drawings are final.

Is the inspection office the same as the fire station?

No. Stations 68, 125 and 67 serve Calabasas for emergency response, while business inspections run through the Fire Prevention office on Agoura Road.

When would a technician be in the area?

Call (213) 568-0188 with your address. We'll work out a site visit date.

Can the same contractor handle the 5-year certification later?

Yes. Hedrick's Title 19 license for water-based systems covers that certification.

(213) 568-0188