Skip to main content

Start with the water: who feeds your hydrant

A private hydrant is only as good as the main behind it. Before anyone digs, find out which system supplies the property.

Most addresses inside the city get water from the City of Blythe's own utility. Its Water Treatment Facility is at 557 Ranchette Road, and the Water Transmission division at 440 S. Main Street, (760) 922-6611, is a good first call when you need to coordinate a hydrant flow test with the city.

Not every address is on that system. Hidden Beaches and Riverside County CSA 122 Mesa Verde, for example, run on separate small water systems, so on a site out there the available pressure, the connection rules and the people who approve your tie-in can all differ from what applies in town. Check first.

What goes into a hydrant installation

A new private hydrant sits on a private fire service main. NFPA 24 covers those mains and the fittings attached to them. A typical job runs in this order:

  1. Review the site plan and water supply data.
  2. Run the underground fire service main to the hydrant location.
  3. Set the hydrant, its isolation valve and thrust restraint.
  4. Flush and pressure-test the new main.
  5. Flow test the hydrant under NFPA 291.

NFPA 291 also sets the color code for hydrant bonnets by flow class. So the paint on top means something. It tells an arriving engine crew, before anyone opens a valve, roughly how much water that hydrant can deliver, which is why the bonnet gets painted only after the flow test numbers are in.

Who signs off in Blythe

Blythe runs its own fire department. The city lists it as the Volunteer Fire Department (On Call), at 201 N. Commercial. Fire marshal duties sit in the city Building Department, under the Chief Building Inspector/Fire Marshal, at (760) 922-6161 ext. 1225. Ask that office which plans, permits and inspections a new hydrant needs on your property.

Inside city limits, start with the city. The fire code is in Title 15, Chapter 15.20 of the Blythe Municipal Code; confirm the adopted edition and any local amendments with the fire marshal before your plans are drawn, since those details shape the design.

After it's in: testing every year

Installation is day one. Under NFPA 25, private fire hydrants are inspected and flow tested every year. We handle that work in Blythe too: see annual fire hydrant testing in Blythe, plus hydrant maintenance and hydrant repair for a valve that sticks, a leaking cap or a hydrant that's been hit.

Who does the work, and how to reach us

Hydrant questions are among the most common calls we get from Blythe. California work for 1 Pro Fire is done by Hedrick Fire Protection, which holds C-16 (fire protection) and C-10 (electrical) contractor licenses and is licensed by the California State Fire Marshal under Title 19 for inspection, testing and maintenance of water-based fire protection systems.

Both Blythe ZIP codes, 92225 and 92226, are in our service area. Have your site address handy. Know your water provider, too. Call (951) 384-0323 or email socal@1profire.com.

Adding sprinklers on the same project? See fire sprinkler installation in Blythe. For other regions, see hydrant installations in Los Angeles County or Orange County, or return to the Blythe fire protection hub.

Blythe hydrant installation FAQ

Do you service Blythe for fire hydrant certification?

Yes. Both Blythe ZIP codes are in our service area, and annual hydrant inspection and flow testing follow NFPA 25.

Who do I contact in Blythe about a new private hydrant?

Start with the Chief Building Inspector/Fire Marshal in the city Building Department. For water supply and flow test timing, call the city's Water Transmission division.

Is my property on city water?

Most addresses in town are. Some nearby areas, including Hidden Beaches and CSA 122 Mesa Verde, use separate small water systems, so confirm your provider with the city before any design work starts.

Does a new hydrant need testing after it's installed?

Yes. It's flow tested when it goes into service, and private hydrants are then inspected and flow tested every year under NFPA 25.

Planning a new hydrant in Blythe?

(951) 384-0323 or socal@1profire.com

Send us the site address.

Questions about a Blythe hydrant project?

(951) 384-0323